Milling Process
Milling is the layer by layer materials removing process from the work piece. The process is carried out at milling machine by using specially made rotating cutting tools. The work…
Drilling Process
Drilling is the process of making hole in a work piece by removing materials from it by means of a rotating cutting tool called drill bit. The machine used for…
Turning process
In turning process, a single point cutting tool (normally made up of HSS) is used for removing materials from a fast rotating work piece necessarily by using a machine called…
Blow Molding Process
In blow molding air is pumped after pumping the molten materials into the two piece mold cavity, the combined effect produce thin yet uniform walled components. It is much like…
Injection Molding Process
Injection molding is the process of making components by pumping the liquid materials into the mold cavity necessarily by using injection molding machine. Smooth surface finish can be achieved by…
Forging Process
The component, in forging process, is given shape by applying high localized compressive force. The application of compressive force can be of different types (like by dropping a hammer or…
Hot Rolling Process
Unlike cold rolling, the hot rolling process is carried out above recrystallization temperature. The component produced by this method does not get work hardened. Large cross sectional change is possible…
Cold Rolling Process
Cold rolling is the process of giving shape to the soft raw materials by passing it through a set of rollers without applying heat (or, more technically, below recrystallization temperature).…
Shot Pinning Process
In Shot pinning, hard metallic balls are shot at high speed all over the exposed surfaces of the component by keeping the component at an enclosed chamber. The same metallic…
Stamping Process
In stamping process, extreme high pressure is applied to the sheet metal piece to give it a shape of the final component. The characteristics of this process are ability to…
- Go to the previous page
- 1
- …
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- …
- 19
- Go to the next page