How Tandem Axle Bogie Suspension System of Heavy Duty Truck Works

What is a Tandem Axle Bogie Suspension?

Tandem” means “one unit after another and the units work together”. In case of the heavy duty trucks and trailer, the tandem axle bogie suspension means one unit of axle with suspension system after another work together.

 

 

A simple representation of the tandem axle bogie suspension system is shown below:

 

Tandem Axle Twin Bogie Suspension

 

How really it works?

 

  • As the front wheel hits the hump ( or dip ) in the road, the interconnected shackle will be oscillated with respect to the pivot.
  • The interconnected shackle, then, in turns lower (or higher) the rear wheel accordingly.
  • In short, both the units of the tandem axle ( with suspension and wheels) work in sync according the road conditions to share the loads and thus prevents a single pair of wheels to take the whole amount of loads.

 

 

To get the picture clearer, lets compare the wheel and axle movements of tandem axle spring suspension with an uncompensated (simple) twin axle suspension system. See below:

 

Uncompensated Twin Axle Suspension System

 

The above picture is showing the situation where a heavy truck with uncompensated twin axle suspension pass over the hump of the road, the rarest wheel get lifted momentarily and all the payload force applied to the road through one pair of wheels (rear wheel-1). Needless to say that such a situation can cause damage not only to the vehicle but also to the road.

 

Now, lets see what happened to a truck fitted with a tandem twin axle suspension:

Working of a Tandem Axle Bogie Suspension

 

Here, as you can see from the above picture, due to the oscillation of the interconnected shackle about its pivot, the rear wheel-2 doesn’t loose contacts with the ground. The shackle forces the rear (axle) wheel-2 to lower itself and to make contact with the ground.

 

 

So, from the comparison it can be concluded that the tandem twin axle bogie suspension distributes loads better than uncompensated twin axle suspension while passing through the uneven roads.

 

 

 

 

Shibashis Ghosh

Hi, I am Shibashis, a blogger by passion and an engineer by profession. I have written most of the articles for mechGuru.com. For more than a decades i am closely associated with the engineering design/manufacturing simulation technologies. I am a self taught code hobbyist, presently in love with Python (Open CV / ML / Data Science /AWS -3000+ lines, 400+ hrs. )

This Post Has 2 Comments

  1. Elysee

    Hello, I just want to know if this system (bogie suspension) is pneumatic, may you help please?

    1. Shibashis

      No.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.